Scrap Radial Tire Shredder LP1200A

Tire Shredder 1.Cutter Number:22 2.Cutter Rotating Speed:15r/min 3.Capacity:2000Kg/h 4.Discharging Size:Strips (50mm wide)

Scrap Radial Tire Shredder

Structure Features:

       The shredding chamber is closely mated with the left-hand drive. The cutter consists of blade and hooks. The function of hooks is to catch tires. Special anti-wear hard alloy is built-up welded on the working face of the cutter, which are durable and corrosion proof.       The shredding chamber is a combined structure and the cutter shaft is supported with rolling bearings, which is convenient for installation and maintenance.       The cylinder sieve or back-feed conveyer (optional) will repeatedly send those unqualified chips or shivers back to the shredding chamber, and at the same time send out those qualified ones.       The transmission system adopts a Hard Face Gear Reducer, which has a compacted structured with higher transmission efficiency, lower noise and longer service life.       The shredder is compactly structured and practically collocated. It is easy and reliable for operation and convenient for both installation and maintenance.

Application:

 The machine is applicable for breaking up complete bias or radial (steel) tires. 

Techincal Data:

Model & Spec.	LP-1200A
Cutter Number	22(18)
Rotating Speed of Cutter Shaft	15(13)r/min
Capacity	2000Kg/h
Feeding Requirement	Complete tires ≤Φ900) after taking off bead ring and all kinds of tread slabs
Discharging Size	Strips (50mm wide) or blocks (50×50mm)
Main Motor Power	75KW
Speed Reducer	Hard Face Gear Reducer
Overall Dimensions	5960×2800×3390 (mm)

Scrap Radial Tire Shredder LP1200A